Instructions – KarTent Junior

Step 1

 

 

Open the shell

Step 2

 

 

Make sure the tapestrip is in the bottom left or right 

You need to have an open space at the bottom

 

 

 

Step 3

 

 

Fold sides of back panel

Step 4

Slide the back panel in the shell

This only works if the tape strip is on the lower left or right side

Step 5

Slide in until the sides and top are aligned with the shell

Step 6

Poke the plugs through the holes of the back panel and the shell 

then screw them tight

 

Step 7

Use five plugs on the back panel

Step 8

Hang the panel with the doorbell in the front panel and connect the top

Step 9

Hang the panel with the KarTent logo on it in the front panel and connect the top

Step 10

Fold the sides of the complete door

Step 11

Slide the door in the shell making sure the parts that stick out

are pointing inwards

Step 12

Slide in until the sides and top are aligned with the shell

 

Step 13

Poke the plugs through the holes of the door and the shell then

screw them tight

 

Step 14

Use five plugs to secure the doorpanel

Step 15

Flip the bottom sides of the back and door under the tent

Step 16

Push the pegs through the marked x’s on the bottom of the tent into the ground

Not shown properly because we have a wooden floor 😉

WordPress Image Lightbox